Mathematical Modeling and Computational Identification of Photovoltaic Module Degradation under the Equatorial Climate of Kuala Lumpur, Malaysia
Keywords:
photovoltaic degradation, mathematical modeling, parameter identification, tropical climate, soiling, Malaysia, nonlinear least squaresAbstract
Photovoltaic (PV) modules deployed in equatorial climates operate under permanently elevated cell temperatures, relative humidity above 80 % and intense but intermittent rainfall, and the resulting long-term power loss is difficult to quantify because irreversible degradation is superimposed on fully reversible environmental losses. This study develops and tests a mathematical and computational framework that separates the two. A stochastic hourly climate generator reproduces the prescribed monthly climatological normals of Kuala Lumpur (3.139° N, 101.6869° E) exactly, yielding an annual global horizontal irradiation of 1790.6 kWh m⁻² and 2844 mm of precipitation. A NOCT model with a convective wind correction, a temperature-corrected power model, a coupled Arrhenius–Peck acceleration factor driving an exponential irreversible degradation law, and a saturating soiling model with partial rainfall cleaning are combined into a single output equation and solved at hourly resolution over ten years for a generic 400 W monocrystalline silicon module. A two-stage identification algorithm — physical clean-day filtering followed by robust nonlinear least squares — recovers the degradation rate from noisy synthetic performance data. For four prescribed rates between 0.2 and 1.0 % yr⁻¹ the algorithm returned estimates within 0.0043 percentage points of the prescribed value (mean relative error 0.98 %, mean R² = 0.988). At the baseline rate the modelled ten-year power loss reached 4.89 % and the annual yield fell from 685.6 to 655.5 kWh (4.39 %). Combined thermal and humidity stress raised the ten-year loss to 6.66 %. All results are synthetic simulation outputs, not field measurements
References
1. Dubey, S., Sarvaiya, J. N., & Seshadri, B. (2013). Temperature dependent photovoltaic (PV) efficiency and its effect on PV production in the world – A review. Energy Procedia, 33, 311–321. https://doi.org/10.1016/j.egypro.2013.05.072
2. Faiman, D. (2008). Assessing the outdoor operating temperature of photovoltaic modules. Progress in Photovoltaics: Research and Applications, 16(4), 307–315. https://doi.org/10.1002/pip.813
3. Hasan, K., Yousuf, S. B., Tushar, M. S. H. K., Das, B. K., Das, P., & Islam, M. S. (2022). Effects of different environmental and operational factors on the PV performance: A comprehensive review. Energy Science & Engineering, 10(2), 656–675. https://doi.org/10.1002/ese3.1043
4. Ilse, K., Micheli, L., Figgis, B. W., Daßler, D., Hanifi, H., Wolfertstetter, F., Naumann, V., Hagendorf, C., Gottschalg, R., & Bagdahn, J. (2019). Techno-economic assessment of soiling losses and mitigation strategies for solar power generation. Joule, 3(10), 2303–2321. https://doi.org/10.1016/j.joule.2019.08.019
5. International Energy Agency Photovoltaic Power Systems Programme. (2025). Snapshot of global PV markets 2025 (Report IEA-PVPS T1-31:2025). IEA PVPS.
6. Islam, M. I., Jadin, M. S. B., Al Mansur, A., & Alharbi, T. (2024). Electrical performance and degradation analysis of field-aged PV modules in tropical climates: A comparative experimental study. Energy Conversion and Management: X, 24, 100719. https://doi.org/10.1016/j.ecmx.2024.100719
7. Jordan, D. C., & Kurtz, S. R. (2013). Photovoltaic degradation rates—An analytical review. Progress in Photovoltaics: Research and Applications, 21(1), 12–29. https://doi.org/10.1002/pip.1182
8. Jordan, D. C., Kurtz, S. R., VanSant, K., & Newmiller, J. (2016). Compendium of photovoltaic degradation rates. Progress in Photovoltaics: Research and Applications, 24(7), 978–989. https://doi.org/10.1002/pip.2744
9. Kaaya, I., Koehl, M., Mehilli, A. P., de Cardona Mariano, S., & Weiss, K. A. (2019). Modeling outdoor service lifetime prediction of PV modules: Effects of combined climatic stressors on PV module power degradation. IEEE Journal of Photovoltaics, 9(4), 1105–1112. https://doi.org/10.1109/JPHOTOV.2019.2916197
10. Köntges, M., Kurtz, S., Packard, C., Jahn, U., Berger, K. A., Kato, K., Friesen, T., Liu, H., & Van Iseghem, M. (2014). Review of failures of photovoltaic modules (Report IEA-PVPS T13-01:2014). International Energy Agency Photovoltaic Power Systems Programme. ISBN 978-3-906042-16-9
11. Kottek, M., Grieser, J., Beck, C., Rudolf, B., & Rubel, F. (2006). World map of the Köppen-Geiger climate classification updated. Meteorologische Zeitschrift, 15(3), 259–263. https://doi.org/10.1127/0941-2948/2006/0130
12. Lindig, S., Kaaya, I., Weiss, K.-A., Moser, D., & Topič, M. (2018). Review of statistical and analytical degradation models for photovoltaic modules and systems as well as related improvements. IEEE Journal of Photovoltaics, 8(6), 1773–1786. https://doi.org/10.1109/JPHOTOV.2018.2870532
13. Micheli, L., & Muller, M. (2017). An investigation of the key parameters for predicting PV soiling losses. Progress in Photovoltaics: Research and Applications, 25(4), 291–307. https://doi.org/10.1002/pip.2860
14. NASA Langley Research Center. (2026). POWER data access viewer: Prediction of worldwide energy resources [Data set]. National Aeronautics and Space Administration. https://power.larc.nasa.gov/
15. Ndiaye, A., Charki, A., Kobi, A., Kébé, C. M. F., Ndiaye, P. A., & Sambou, V. (2013). Degradations of silicon photovoltaic modules: A literature review. Solar Energy, 96, 140–151. https://doi.org/10.1016/j.solener.2013.07.005
16. Peck, D. S. (1986). Comprehensive model for humidity testing correlation. In 24th International Reliability Physics Symposium (pp. 44–50). IEEE. https://doi.org/10.1109/IRPS.1986.362110
17. Phinikarides, A., Kindyni, N., Makrides, G., & Georghiou, G. E. (2014). Review of photovoltaic degradation rate methodologies. Renewable and Sustainable Energy Reviews, 40, 143–152. https://doi.org/10.1016/j.rser.2014.07.155
18. Quansah, D. A., & Adaramola, M. S. (2018). Ageing and degradation in solar photovoltaic modules installed in northern Ghana. Solar Energy, 173, 834–847. https://doi.org/10.1016/j.solener.2018.08.021
19. Skoplaki, E., & Palyvos, J. A. (2009). On the temperature dependence of photovoltaic module electrical performance: A review of efficiency/power correlations. Solar Energy, 83(5), 614–624. https://doi.org/10.1016/j.solener.2008.10.008
20. Sulaiman, S. A., Razif, M. R. M., Han, T. D., Atnaw, S. M., & Tamili, S. N. A. (2018). Impact of soiling rate on solar photovoltaic panel in Malaysia. MATEC Web of Conferences, 225, 04008. https://doi.org/10.1051/matecconf/201822504008


